Heating Operation - Hitachi RAK-50NH5 Bedienungsanleitung

HEATING OPERATION

G Use the device for heating when the outdoor temperature is under 21°C.
When it is too warm (over 21°C), the heating function may not work in order to protect the device.
G In order to keep reliability of the device, please use this device above -15°C of the outdoor temperature.
˚ C
RESET
˚ C
All manuals and user guides at all-guides.com
Press the FUNCTION selector so that the display indicates
1
(HEAT).
Set the desired FAN SPEED with the
(the display indicates the setting).
(AUTO): The fan speed is HI at first and varies to
2
(HI) : Economical as the room will become warm
(MED) : Fan speed slow.
(LOW) : Fan speed slower.
Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the setting).
3
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
START
Press the (START/STOP) button. Heating operation starts
with a beep. Press the button again to stop operation.
STOP
I As the settings are stored in memory in the remote controller, you only
have to press the
– 8 –
MED or LOW automatically when the preset
temperature has been reached.
quickly.
But you may feel a chill at the beginning.
(START/STOP) button next time.
(FAN SPEED) button