Yamaha YZ450F Fahrer- Und Wartungshandbuch Seite 554

SWINGARM
3. Install:
• Bearing 1
• Oil seal 2
To connecting rod.
NOTE:
• Apply the molybdenum disulfide grease on
the bearing when installing.
• Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
Installed depth of bearings a:
Zero mm (Zero in)
Swingarm
1. Install:
• Bush 1
• Thrust bearing 2
• Oil seal 3
• Collar 4
To swingarm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bushes, thrust bearings, oil seal lips and con-
tact surfaces of the collar and thrust bearing.
2. Install:
• Collar 1
• Washer 2
To relay arm 3.
NOTE:
Apply the molybdenum disulfide grease on the
collars and oil seal lips.
5 - 58
CHAS