Yamaha YZ450F Fahrer- Und Wartungshandbuch Seite 390

KICK AXLE AND SHIFT SHAFT
3. Install:
NOTE:
• The shift lever assembly is installed at the
same time as the shift guide.
• Apply the engine oil on the bolt (segment)
shaft.
4. Install:
EC4C5301
Shift shaft
1. Install:
NOTE:
Apply the engine oil on the roller and shift
shaft.
2. Install:
NOTE:
When installing the shift pedal onto the shift shaft,
be sure that the center of the shift pedal is about
4.4 mm (0.17 in) a above the top of the footrest.
4 - 75
• Shift lever assembly 1
• Shift guide 2
• Bolt (shift guide) 1
10 Nm (1.0 m · kg, 7.2 ft · lb)
• Roller 1
• Collar 2
• Torsion spring 3
• Plain washer 4
• Shift shaft 5
• Shift pedal 1
• Bolt (shift pedal)
12 Nm (1.2 m · kg, 8.7 ft · lb)
ENG