Yamaha YZ450F Fahrer- Und Wartungshandbuch Seite 528

HANDLEBAR
2. Install:
• Handlebar 1
• Handlebar holder (upper) 2
• Bolt [handlebar holder (upper)] 3
NOTE:
• The handlebar holder (upper) should be
installed with the punched mark a forward.
• Install the handlebar so that the marks b are
in place on both sides.
• Install the handlebar so that the projection c
of the handlebar holder (upper) is positioned
at the mark on the handlebar as shown.
• First tighten the bolts on the front side of the
handlebar holder (upper), and then tighten
the bolts on the rear side.
3. Tighten:
• Nut [handlebar holder (lower)] 1
5 - 45
CHAS
28 Nm (2.8 m · kg, 20 ft · lb)
34 Nm (3.4 m · kg, 24 ft · lb)