Manual Station Preset; Clearing The Preset Station - Yamaha YHT-S401 Bedienungsanleitung

Listening to FM broadcasts

■ Manual station preset

Use this feature to preset your desired station manually.
1
Tune into a radio station you want to preset.
2
Press MEMORY.
"MANUAL PRESET" appears in the front panel
display, followed soon by the preset number to which
the station will be registered.
y
By pressing down MEMORY for more than 2 seconds, the
station is registered to the lowest empty preset number or a
preset number one higher than the last preset number.
3
Press PRESET
number (01 to 40) to which the station will be
registered.
When you select a preset number to which no station
is registered, EMPTY indicator appears on the
display. When you select a registered preset number,
a registered frequency is displayed on the right of the
preset number.
y
To cancel registration, press RETURN on the remote
control or leave the tuner without any operations for about
30 seconds.
4
Press MEMORY again to register.
14
En
/ to select the preset

■ Clearing the preset station

1
Press OPTION to enter the option menu.
2
Display "3.CLEAR PRESET" using
and press ENTER.
Preset number and the frequency appears in the front
panel display.
y
You can cancel the operation and return to the option menu
by pressing RETURN on the remote control.
3
Select the preset number of the registered
station you want to clear using
press ENTER.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat the above steps.
To end the operation, press OPTION.
■ Using the monaural reception
mode
When the signal of the desired FM station is too weak, set
the reception mode to "MONO" to increase signal quality.
1
Press OPTION to enter the option menu.
2
Display "4.STEREO/MONO" by using
press ENTER.
3
Select "MONO" to set the reception mode to
monaural by using
/
/ and
and
/ .