De-Installation - Flamco Baseflex Montage- Und Bedienungsanleitung

1.4. De-installation

1. Allow the installation to cool down and release the pressure from it.
2. Remove the cover cap (G) and the plug (F). (fig. 9, 10)
3. Push the inner valve (H) in to drain the pressure from the expansion vessel. (fig. 11)
4. Unscrew the expansion vessel (A). (fig. 12)
Note: a full expansion vessel is heavy!
The water in the expansion vessel may be hot.
Observe local regulations when you dispose of the expansion vessel.
8
We reserve the right to change designs and technical specifications of our products.