Overview; Description Of Functions; Technical Data - Parkside Pabs 20-Li G8 Originalbetriebsanleitung

• 40× Screw bit (10×50 mm, 10×75 mm,
20×25 mm)
PH1, PH2, PH3
PZ1, PZ2, PZ3
T15, T20, T25, T30
SL4, SL5, SL6
H3, H4, H5, H6
• 14× Metal drill bits (1.5, 2, 2.5, 3, 3.5,
4, 4.5, 5, 5.5, 6, 6.5)
• 5× Wood drill bits (4, 5, 6, 8, 10)
• 8× Socket wrench (6, 7, 8, 9, 10, 11,
12, 13)
• Bit holder
• Carpenter's pencil + 2× Spare lead
• Cutter knife
• Countersink
• Centre punch
• Measuring tape
• Storage case
• Translation of the original instructions
• Rechargeable battery and charger with
instruction manual

Overview

The illustrations for the device
can be found on the front and
back fold-out page.
1 Drill chuck aperture
2 Keyless chuck
3 Torque adjustment ring
4 Gear selector switch
5 Magnet
6 Handle (Insulated gripping surface)
7 Battery holder
8 Button (Charge level indicator)
9 Charge level indicator
10 Battery
11 Battery release
12 LED work light
13 Belt clip
14 On/Off switch
15 Direction of rotation switch
16 Charger
17 Storage case
18 Screw bit
19 Metal drill bits
20 Wood drill bits
21 Bit holder
22 Carpenter's pencil
23 Spare lead
24 Cutter knife
25 Socket wrench
26 Countersink
27 Measuring tape
28 Centre punch
Fig. D
24.1 Release (Cutter knife)
24.2 Slider (Cutter knife)
Fig. E
27.1 Locking slider (Measuring tape)
27.2 Locking button (Measuring tape)
27.3 Clip (Measuring tape)

Description of functions

The drill driver is equipped with a slip clutch
that decouples the drive from the spindle
when a preselected maximum torque is
reached.
Please refer to the descriptions below for in-
formation on how the operating elements
work.

Technical data

Cordless Drill Driver ............ PABS 20-Li G8
Rated voltage U ..................................20 V ⎓
Weight (without battery) ...................≈1.26 kg
No-load rotation speed n
– 1st gear .................................... 0–430 min⁻¹
– 2nd gear ................................. 0–1500 min⁻¹
Max. torque ......................................... 45 Nm
Chuck capacity ............................ 1,5-13 mm
Max. drilling diameter
–wood ................................................. 30 mm
–Metal ................................................. 13 mm
Sound pressure level (L
......................................... 75.1 dB; K
Sound power level (L
WA
Vibration (a ) ............... ≤2.5 m/s²; K=1.5 m/s²
h
Battery .................................................. Li-Ion
Temperature ........................................≤50 °C
– Charging .........................................4–40 °C
GB MT
0
)
pA
=5 dB
pA
) 83.1 dB; K =5 dB
WA
19