Busy Channel Lockout; Keypad Menu Setup - Retevis Rt95 Bedienungsanleitung

VHF: 0 - 38 Mhz frequency avaiable.
UHF: 0 - 90 Mhz frequency avaiable.
4. Press [PUSH] button or [P3] key to store setting and exit.
» OFFSET frequency is adjusted according to step size setup. This function is hide when RTDF function is on.
7.11 Editing Channel Name
After edit a name for a channel, if the display mode is channel name, the radio will display
the name edited in this menu. Otherwise it will display the frequency.
1. Enter CHAN MENU list, choose No.11 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3.Turn channel knob to choose wanted setting.Press [PUSH] to confirm and enter editing for next charactor.
4. Press [PUSH] button or [P3] key to store setting and exit.
» In Frequency (VFO) mode or RTDF function is on. ,this function will be auto-hidden.

7.12 Busy Channel Lockout

Busy channel lockout is disable transmitting, once the channel is busy and you press [PTT], the raido will beep as warning
and get back to receiving.
1. Enter CHAN MENU list, choose No.12 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
BU: Signaling busy lockout, transmitting is inhibited when current channel receives a matching carrier.
RL: Signaling busy lockout, transmitting is inhibited when current channel receives a matching carrier but dis-matching
CTCSS/DCS code.
OFF: Busy channel lockout is disabled.Transmitting is allowed in any receiving status
4. Press [PUSH] button or [P3] key to store setting.
7.13 TX OFF
1. Enter CHAN MENU list, choose No.13 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
ON: TX allowed, press [PTT] to transmit
OFF: TX not allowed, only work in RX mode, press [PTT] will emit a beep.
4. Press [PUSH] button or [P3] key to store setting and exit
7.14 OWNID (SELF ID ENQUIRY)
1. Enter CHAN MENU list, choose No.14 function;
2. The LCD will display current channel DTMF ID or 5Tone ID.

8. KEYPAD MENU SETUP

8.1 Main unit keypad menu setup
1. Hold [FUNC] key to enter SELECT MENU interface.
2. Short press [P4] key, [P6] key or turn channel knob to choose menu list. Short press [P5] can fast turn page.
3. Press [PUSH] button to enter MINI KEY menu list.
4. Turn channel knob to choose wanted setting.
5. Short press [PUSH] button to choose wanted keypad group.
6. Short press [P1]~[P6] key to choose wanted self-define key.
7. Press [FUNC] to confirm and exit.
8.2 H-DIM Microphone keypad backlight setup
1. Hold [FUNC] key to enter SELECT MENU interface.
2. Short press [P4] key, [P6] key or turn channel knob to choose menu list. Short press [P5] can fast turn page.
3. Press [PUSH] button to enter HANDY KEY menu list.
4. Short press [P4] key, [P6] key or turn channel knob to choose wanted setting.
8.3 Microphone keypad backlight brightness Setup
1. Hold [FUNC] key to enter SELECT MENU interface.
2. Short press [P4] key, [P6] key or turn channel knob to choose menu list. Short press [P5] key can fast turn page.
3. Press [PUSH] button to enter HAND KEY menu list, choose No.1 function, press [PUSH] key to enter value setting, the
menu value in LCD turns to green color.
4. Turn channel knob to choose wanted setting, the microphone keypad has OFF-31, total 32 brightness levels. OFF means
turn off backlight brightness.
5. Press [PUSH] button or [P3] key to store setting and exit.
8.4 H-PA H-PD Microphone self-define keypad setup
1. Hold [FUNC] key to enter SELECT MENU interface
2. Short press [P4] key, [P6] key or turn channel knob to choose menu list. Press [P5] can fast turn page.
3. Press [PUSH] button to enter HANDY KEY menu list.choose NO.2-5 function, then press [PUSH] button to enter value
14