Retevis RT95 Bedienungsanleitung Seite 13

OFF: Turn off TOT function
4. Press [PUSH] button or [P3] key to store setting and exit.
6.13 APO (Automatic Power OFF)
Once APO is activated, the transceiver will be automatically switched off when the pre-set timer running out.
1. Enter FUNCTION MENU list, choose No.13 function.
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
30Min: Automatical power off after 30 minutes.
60Min: Automatical power off after 60 minutes.
120Min: Automatical power off after 120 minutes.
OFF: Automatical power off function is off.
4. Press [PUSH] button or [P3] key to store setting and exit.
6.14 Pilot Frequency
This function uses to start repeater. It needs a certain intensity Pilot Frequency to start
dormant repeater. As usual, no need to send pilot frequency again once repeater started.
1. Enter FUNCTION MENU list, choose No.14 function.
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
1000Hz: Pilot frequency 1000Hz
1450Hz: Pilot frequency 1450Hz
1750Hz: Pilot frequency 1750Hz
2100Hz: Pilot frequency 2100Hz
4. Press [PUSH] button or [P3] key to store setting and exit.
6.15 DIR (LCD display direction setup)
1. Enter FUNCTION MENU list, choose No.15 function.
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
FAIL: Revers display.
STAN: normal display.
4. Press [PUSH] button or [P3] key to store setting and exit.
6.16 Microphone Speaker
1. Enter FUNCTION MENU list, choose No.16 function.
2. Press [PUSH] button, the menu value in LCD turns to green color
3. Turn channel knob to choose wanted setting.
M&H: Turn on Main speaker and microphone speaker.
MAIN: Turn on Main speaker.
HAND: Turn on microphone speaker.
4. Press [PUSH] button or [P3] key to store setting and exit
6.17 RTDF ( RX/TX dissimilar frequency Setup)
This radio has dissimilar frequency function, when this function is on the frequency in upside of LCD is RX frequency, and
the downside frequency is TX frequency. You can revise the RX frequency by numberic key in microphone, you can revise
TX frequency by the A/B key in microphone or the PX dey defined as A/B function.
1. Enter FUNCTION MENU list, choose No.17 function.
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
ON: Turn on RTDF function.
OFF: Turn off RTDF function
4. Press [PUSH] button or [P3] key to store setting and exit.
» Only can turn on RTDF function in VFO mode.
6.18 VOX FUNCTION SETTING
1. Enter into FUNC Menu ,select menu 18.
2. Press PUSH to enter into menu setting,the menu value in LCD turns to green color.
3. Turn Channel knob to choose wanted setting.
ON: Enable VOX
OFF: Disabe VOX
4. Press [PUSH] button or [P3] key to store setting and exit.
6.19 VOX-L:VOX Sensitivity setting
1. Enter into FUNC Menu ,select menu 19.
2. Press [PUSH] to enter into menu setting,the menu value in LCD turns to green color.
3. Turn Channel knob to choose wanted setting.
1: high level 9: low level
4. Press [PUSH] button or [P3] key to store setting and exit.
11