Channel Menu - Retevis Rt95 Bedienungsanleitung

6.20 VOX-T: VOX Delay Time setting
1. Enter into FUNC Menu ,select menu 20.
2. Press [PUSH] to enter into menu setting,the menu value in LCD turns to green color.
3. Turn Channel knob to choose wanted setting.
1: short delay time
9: long delay time
4. Press [PUSH] button or [P3] key to store setting and exit.
6.21 Reset Factory Default
If you radio seems to be malfunctioning because of wrong operation or setup, this function will be able to resume all setup
and channels to factory default.
1. Enter FUNCTION MENU list, choose No.21 function.
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
ALL: All channel, signaling function setup resume factory default.
OPT: All function menu setup resume factory default except CHAN MENU.
4. Press [PUSH] button or [P3] key to store setting and exit.

7.CHANNEL MENU

1. Hold [FUNC] key to enter SELECT MENU interface.
2. Short press [P4] key, [P6] key or turn channel knob to choose menu list. Short press [P5].
key can fast turn page.
3. Press [PUSH] button to enter CHAN MENU list.
4. Short press [P4],[P6] key or turn channel knob to choose wanted setting.
7.1 RCDT (CTCSS/DCS Decode Setup)
1. Enter CHAN MENU, choose No.1 function.
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
OFF: Turn off CTCSS/DCS decode.
CTCSS: Choose CTCSS decode.
DCS: Choose DCS decode.
4. When choose CTCSS/DCS decode, press [PUSH] button to enter CTCSS/DCS decode
setup, then turn channel knob to choose wanted CTCSS/DCS decode.
DCS: 000N-777I, total 1024 groups.
N is positive code, I is inverse code.
Press [FUNC] key can choose positive or inverse code.
5. Press [PUSH] button or [P3] key to store setting and exit.
» The working of CTCSS/DCS decode shall be work associated with the squelch mode setup. (Refer to Signaling
Combination setup in page 22).
7.2 CTCSS/DCS Encode Setup
1. Enter CHAN MENU, choose No.2 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
OFF: Turn off CTCSS/DCS encode.
CTCSS: Choose CTCSS encode.
DCS: Choose DCS encode.
4. When choose CTCSS/DCS encode, press (PUSH) button to enter CTCSS/DCS
encode setup, then turn channel knob to choose wanted CTCSS/DCS encode.
CTCSS:62.5-254.1HZ,and one self-define group,total 52 groups.
DCS: 000N-777I, total 1024 groups
N is positive code, I is inverse code.
5. Press [PUSH] button or [P3] key to store setting and exit.
7.3 HIGH/MID/LOW Power Selection
1. Enter CHAN MENU, choose No.3 function.
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
HI: Choose high power level.
MI: Choose middle power level.
LO: Choose low power level.
4. Press [PUSH] button or [P3] key to store setting and exit.
7.4 5TENC (5TONE ENCODE SELECT)
1. Enter CHAN MENU, choose No.4 function;
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
0~99: Total 100 groups 5Tone encode for selection.
4. Press [PUSH] button or [P3] key to store setting and exit.
12