Translation Of The Original Ec Declaration Of Conformity - Parkside Pkga 20-Li C2 Originalbetriebsanleitung

GB MT
Problem
Attachment tool wears down
quickly
Translation of the original EC declaration of
conformity
Product: Cordless Combination Tool
Model: PKGA 20-Li C2
Serial number: 000001–062000
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
2006/42/EC • 2014/30/EU • 2011/65/EU & (EU) 2015/863
Product with battery Smart PAPS 204 A1/
The object of the declaration described above is in conformity with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and electronic
equipment.
To ensure conformity, the following harmonised standards and national standards and
regulations have been applied:
EN 62841-2-1:2018/A11:2019 • EN 62841-2-4:2014
EN 62841-2-11:2016/A1:2020 • EN ISO 12100:2010
EN IEC 63000:2018 • EN IEC 55014-1:2021 • EN IEC 55014-2:2021
Product with battery Smart PAPS 204 A1/Smart PAPS 208 A1:
EN 301 489-1 V2.2.3:2019 • Draft EN 301 489-17 V3.2.5:2022
EN 300 328 V2.2.2:2019 • EN 50663:2017
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Str. 20
63762 Großostheim
GERMANY
13.05.2024
48
Possible cause
Attachment tool unsuitable
for the workpiece to be pro-
cessed
Too much pressure applied
Speed too high
Smart PAPS 208 A1: 2014/53/EU
EN 62841-1:2015/A11:2022
Troubleshooting
Insert a suitable attachment
tool
Reduce the pressure
Reduced speed
Christian Frank
Authorised representative of documentation