Operating Field; Ignition Lock; Indicator Lamps - Kärcher KMR 1700 D Bedienungsanleitung

Operating field

1 Switch on low beam
2 Switch off low beam
3 Switch on hazard warning system
4 Switch off hazard warning system
5 Lock/ release parking brake
1 Indicator lamp of waste container
2 Raise waste container
3 Tip waste container out
4 Tip waste container back in
5 Lower waste container
6 Shake off dust filter
7 Switch on suction blower
8 Switch off suction blower
9 Lower/ start side-brushes
10 Raise side-brushes
11 Lower/ start sweep roller
12 Raise roller brush
13 Lock roller brush in operating type "Fine
setting" or "store in floating position"
Increase/decrease sweeping track
22

Ignition lock

– Position 0: Switch off engine
– Position 1: Pre-glow (lamp lights up)
– Position 2: Start the engine
Direction indicator/ high beam/ horn
– Left indicator: Press the lever down-
ward.
– Right indicator: Press the lever upward.
– Switch on high beam: Pull lever towards
you
– Horn: Activate the lever
Pedals
A Accelerator pedal, "forwards"
B Accelerator pedal, "reverse"
C Brake pedal
D Pedal "Increase roller brush contact
pressure" (only in operating mode
"store in floating position")
4
-
EN

Indicator lamps

1 Operating hour counter
2 Parking brake
3 Travel direction indicator
4 Full beam
5 Cool water temperature
6 Battery charger control
7 Pre-glowing system
8 Beacon (accessory)
9 Dipped beam
10 Warning system
11 Oil pressure display