Manual Control - Boneco H400 Smart Anleitung

38
en

MANUAL CONTROL

1. Briefly press the knob once to switch on the
BONECO SMART appliance.
2. Adjust the output to your needs by setting the
knob to the desired level from 1 to 6. This action
exits AUTO mode (Status LED is off).
The selected performance level is indicated by the
number of LEDs that light up above the knob.
3. Briefly press the knob once to reactivate AUTO
mode.
4. Briefly press the knob once more to switch off the
BONECO SMART appliance.
If you exit AUTO mode, the BONECO SMART ap-
pliance will continue at the selected perfor-
mance level until the water base is empty, regard-
less of what the current level of humidity is.