Meaning Of The Status Led; Status Led In White, Blue Or Green; Status Led Pulsating In Blue Or White; Status Led Flashing In White, Blue Or Green - Boneco H400 Smart Anleitung

MEANING OF THE STATUS LED

STATUS LED IN WHITE, BLUE OR GREEN

In normal operation, the status LED lights up in the
color of the current operating mode continuously.
The performance level is indicated by the number of
the illuminated ring LEDs.

STATUS LED PULSATING IN BLUE OR WHITE

A pulsating status LED indicates that the target hu-
midity has been exceeded in AUTO mode; the appli-
ance is now in stand-by mode. Operation resumes
as soon as the humidity drops below the set level.

STATUS LED FLASHING IN WHITE, BLUE OR GREEN

When the status LED is flashing in white, blue or
green, the BONECO SMART appliance is ready for pai-
ring via BONECO SMART App.

STATUS LED FLASHING IN RED

The status LED flashes in red, when the device has
run out of water. Refill the device with fresh, cold
tap water.
The status LED flashes in red, when the filter is mis-
sing in the Hybrid- or Purification mode. Insert the
filter in the device.
The BONECO SMART App provides you with more de-
tailed information.
39
en