Operation On The Device; About Operation On The Device; Auto Mode; Adapted Auto Mode - Boneco H400 Smart Anleitung

OPERATION ON THE DEVICE

ABOUT OPERATION ON THE DEVICE

The operation of the device works conveniently by
the knob on the front side. The BONECO SMART App
offers additional, extensive options for control and
automation of the BONECO SMART appliance.

AUTO MODE

If you have never operated the BONECO SMART ap-
pliance with the BONECO SMART App and switch it
on for the first time, it starts up in AUTO mode. The
appliance is preset to a target relative humidity of
50 percent. The performance level is automatically
adapted to the current humidity: The drier the air,
the higher the performance level.
If the preset target humidity is exceeded, the appli-
ance switches to standby mode, which is indicated
by the pulsating LED.
If the humidity drops below the set level, the
BONECO SMART appliance resumes operation.

ADAPTED AUTO MODE

If you have already operated the BONECO SMART ap-
pliance with the BONECO SMART App and set a dif-
ferent humidity, that value is automatically taken
over.

SWITCHING ON AND OFF

1. Briefly press the knob once to switch on the
BONECO SMART appliance.
You can identify active AUTO mode by the small
status LED that lights up above the knob.
2. To switch off the BONECO SMART appliance while
it is in AUTO mode, briefly press the knob once.
37
en