Titration Stand Tm 235 To - Xylem Si Analytics To 7280 Gebrauchsanleitung

52

Titration stand TM 235 TO

1.3.3
Translation of the legally binding German version
In combination with the titrator TitroLine
EMC compatibility according to the Council Directive: 2014/30/EU;
applied harmonized standards: EN 61326-1
Low-voltage directive according to the Council Directive 2014/35/EU;
Testing basis EN 61 010-1: for laboratory equipment
RoHS Council Directive 2011/65/EU
Country of origin: Germany, Made in Germany
Pump: Free flow rate - air externally adjustable between 50 ... 500 ml / min
Maximum pressure: 1.5 bar
Valve: Automatically switchable valve for switching between air and gas flow
Control: Via USB connection of the titrator TitroLine
Stirring Speed: 50 ... 1000 U/min, adjustable via a control dial
Gas flow meter: Adjustable between 50 ... 500 ml / min
Connections
Low voltage input 12 V / − on the backside of titration stand
Power supply:
Plug connection: plug for low voltage connection – phone jack-,
Positive pole at pin contact, inside contact  = 2.1 mm, USA/Japan,
Power supply via titrator TitroLine
USB: For connection to the TitroLine
Housing:
Material: Polypropylen
Dimensions: 8 x 13 x 25 cm (W x H x D), Height without stand, bottle and titration vessel
Weight: ca. 1.9 kg
Ambient conditions:
Climate: Ambient temperature: + 10 ... + 40 °C for operation and storage
Humidity according to EN 61 010, Part 1:
Max. relative humidity 80 % for temperatures up to 31 °C,
linear decrease down to 50 % relative humidity at a temperature of 40 °C
Altitude: No restrictions
Pollution degree: Pollution degree IP 20, indoor use only.
® 7500 KF trace
Not suitable for use in explosive environments!
® 7500 KF trace
® 7500 KF trace
7500 KF trace (see control unit)
®
(Release: 22. April 2021)