Troubleshooting - Silvercrest SBLV 20 A1 Bedienungsanleitung Und Sicherheitshinweise

NOTE
► Note that while in AUX mode, you can also set the volume via the external
playback device.
► If the playback sounds distorted, reduce the volume on the external play-
back device.

Troubleshooting

The following table will help you to identify and rectify minor malfunctions:
Faults Possible cause
The power cable
nected.
Device does not
The socket is not supplying any
switch on.
power.
The integrated battery is empty.
The volume on the device or the
playback device is set to minimum.
No sound.
Playback has not been started on
the playback device.
Possibly, not all of the Bluetooth
devices are compatible.
Bluetooth
not activated on your playback
The Bluetooth device.
®
connection
The playback device is not paired
cannot be
with the device.
established.
The distance between the device
and the playback device is too
great.
Playback sounds
The volume is set too high on the
distorted in AUX
external playback device.
mode.
NOTE
► If the above-mentioned solutions do not resolve the problem, please contact
Customer Service (see section Service).
SBLV 20 A1
is not con-
®
transmission is
®
Remedy
Connect the power cable
the AC ~ connection socket
Check the house mains fuse.
Charge the integrated battery.
Increase the volume on the device
or on the playback device.
Start playback on the playback
device.
Check the settings on your
device.
®
Bluetooth
Activate Bluetooth
®
sion on your playback device.
Please refer to its operating
instructions for more information.
Repeat the pairing process (see
section Bluetooth mode).
®
Ensure that the device is no more
than 10 metres away from the
playback device.
Point the remote control towards
the front of the device.
Reduce the volume on the external
playback device.
GB │ IE
to
.
transmis-
│
11 ■