Troubleshooting - Silvercrest SLL 16 C1 Bedienungsanleitung Und Sicherheitshinweise

•
Start the playback on your audio device. Make sure the volume is
set to a low level.
•
Then, adjust the speaker volume to the desired level using the
and (2) buttons. The playback can be muted with the
button.
•
Remove the 3.5 mm jack cable (C) from the AUX IN jack (7) once
AUX IN mode is ended.
•
Close the appliance lid (9).
Do not operate the device near water when using the AUX
IN connection as it is not splash-proof when the appliance
cover (9) is open.

10. Troubleshooting

The speaker will not switch on
•
The battery of the speaker is empty. Charge the battery with a
suitable USB mains adapter.
Pairing with a compatible Bluetooth
•
Check whether the speaker is switched on. Switch it on, if
necessary.
•
Check the distance between the speaker and Bluetooth
This may not exceed 10 metres. Obstacles and electronic devices
can have a negative impact on the reception range. Reduce the
distance between the devices, if necessary.
•
Check that the Bluetooth
device that is providing the audio. Activate the Bluetooth
necessary.
®
device will not work
®
feature is enabled on the Bluetooth
SilverCrest SLL 16 C1
®
device.
®
feature, if
English - 47
(3)
(4)
®