Disposal Of Packaging Materials; Set-Up Location Requirements; Connecting The Power Supply - Silvercrest SBLV 20 A1 Bedienungsanleitung Und Sicherheitshinweise

NOTE
► Check the package for completeness and for signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of defec-
tive packaging or during transport, contact the Service hotline (see section
Service).

Disposal of packaging materials

The packaging protects the device from damage during transport. The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the device's original packaging during the warranty period
so that the device can be packed properly for return shipment in the event
of a warranty claim.

Set-up location requirements

For safe and trouble-free operation of the device, the set-up location must fulfil
the following requirements:
■ Place the device on a firm, flat and level surface.
■ Do not operate the device in a hot, wet, extremely damp or explosive environment.
■ Keep a minimum distance of 30 cm to heat-emitting appliances such as heaters,
ovens, etc.
■ Operate the device only in locations with adequate ventilation.
■ The surfaces of some items of furniture might contain components that can corrode
and soften the rubber feet of the device. If necessary, place a mat under the
device's rubber feet.
■ The mains power socket must be easily accessible so that the power cable can
be easily disconnected in an emergency.

Connecting the power supply

■ Before connecting the device, compare the connection data (voltage and
frequency) on the rating plate with that of your mains power supply. This
data must agree so that the device is not damaged.
■ Plug one end of the power cable
the device and the mains plug into a mains socket.
SBLV 20 A1
into the AC ~ socket on the rear of
GB │ IE │
7 ■