Charging The Internal Battery; Handling And Operation; Switch The Device On/Off - Silvercrest SBLV 20 A1 Bedienungsanleitung Und Sicherheitshinweise

Charging the internal battery

The speaker
ated with the power cable
first use, the battery must be fully charged.
■ Move the main switch
The status LED
■ As soon as the status LED
charged.
NOTE
► The charging time is approximately 6 hours and allows up to 4 hours of
music playback at medium volume.

Handling and operation

This section provides you with important information on handling and using the
device.
Switch the device on/off
Mains power operation
♦ Move the main switch
The status LED
♦ To switch the device on, place the toggle switch
The operating LED
♦ Move the toggle switch
mode.
♦ To switch to battery operation, move the main switch
into the OFF position.
Battery operation
♦ To switch the device on, place the toggle switch
The status LED
♦ Move the toggle switch
mode.
│ GB │ IE
■ 8
is equipped with a built-in lithium-ion battery and can be oper-
or with the integrated lithium-ion battery. Before
on the rear of the device to the ON position.
lights up blue/purple and the battery charges.
lights up blue, the integrated battery is fully
on the rear of the device to the ON position.
lights up blue.
flashes blue.
into the position to switch the device into standby
lights up orange and the operating LED
into the position to switch the device into standby
into the ON position.
on the rear of the device
into the ON position.
also flashes blue.
SBLV 20 A1