Change Of The Hinge Position - Pkm GK 202 EB Bedienungsanleitung

10. Now fix the appliance on the built-in unit. The distance appliance (handle side)
to Built-in unit must be 5 mm. The door must close properly. Fix the covers of
the feet and the sealing ledge.
sluggishness of the door.
noise while opening or closing the door.
potentially serious damage on your appliance and/or built-in unit.
In this particular case PKM is not liable for any damage.
Two security angles are included in delivery to stabilize the appliance when being
built-in. Fix the angles between the two doors on the appliance and on the side of
the built-in furniture. Fix the angle of the hinge-side in combination with the hinge.
Adjust the proper position of the angles by sliding them in the screw-openings to
the right/left until they meet the sides of the built-in furniture.
1. Unscrew the two screws (1) of the top hinge (2) and remove the hinge.
2. Remove the upper door from the middle hinge pin. Store the door on a non-
scratching surface.
3. Unscrew the two screws (3) of the middle hinge (4) and remove the hinge.
4. Remove the lower door from the bottom hinge pin. Store the door on a non-
scratching surface.
5. Move the hinge pin (5) from the right bottom hinge (6) to the left bottom hinge
(7).
6. Place the lower door on the left bottom hinge pin.
7. Reverse the direction of the hinge (4). Reassemble the hinge (4) with the two
screws (3) on the left side, while keeping the lower door closed.
8. Do not tighten the screws (3) unless the top of the lower door is level to the top
of the appliance.
9. Place the upper door on the pin of the middle hinge (4).
Disregarding these instructions will lead to:
Additional side-attachment

Change of the hinge position

36