7. THERMOSTAT AND OPERATION
After having installed the appliance wait 4 hours before you
Position 0
Position 1
Position 3
Position 7
T
HE THERMOSTAT CONTROLS THE COMPRESSOR ONLY
You must unplug the appliance to disconnect it from the mains.
1. Select positions 1 to 3 to store food for a short period of time.
2. Select positions 3 to 4 to store food for a long period of time in the
compartment.
3. Press the button
appliance while operating it at ambient temperatures below 16
when the ambient temperature exceeds 16
If you have disconnected the appliance from the energy supply, wait 3-5
minutes before you restart the appliance. Otherwise the appliance can be
damaged.
The setting definitions are standard values only.
1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
7
Equipment depends on model.
Temperature control
connect it to the mains.
WARNING!
7
near the thermostat to maintain proper function of the
Operation parameters
Offs
Warmest setting
Medium setting
Coldest setting
0
C.
38
.
0
C. Press again