Pkm GK 202 EB Bedienungsanleitung Seite 34

The dimensions of the appliance are registered in chap. Technical Data. Please note
the information given in Additional side-attachment at the end of this section.
Carry out the installation with at least 2 persons.
1. Place the appliance in the built-in unit.
2. The distance of the wall at the handle-side of the appliance and the wall of the
built-in unit must be 5 mm.
3. There are three drillings (two holes each) on the outer edge of the door of the
appliance where the sliding hinge brackets have to be fixed. Remove the hole
cover caps first.
With cover caps
4. Mark the position of the holes so that you can fix the hinge brackets in their
proper position. Ensure that the appliance is positioned properly.
5. Separate parts A, B, C and D (look at figure below ).
6. Fix hinge bracket A on the door of the built-in unit. Notice the height of the
holes on the door.
Without cover caps
34