VENDOMNIA RDRGRT01 Original Bedienungsanleitung Seite 6

EN
STEP 2
1. Unplug the water tank plug (G) from the water tank.
2. Filling up the tank (Figure 1). Insert the water pump (C) into the tank, and then use
the water pump (C) and the bucket to water the tank. Measure the amount of water
in the tank with reference to the digit mark on the side of the tank.
3. Pump out water out of the tank as shown in figure 2. Place a bucket next to the
rowing machine, and use a water pump (C) to pump water from the tank into the
bucket. Put the water tank plug (G) back and dry the water droplets on and around
the rowing machine with a dry cloth.
6
C
C
G
G
If you have any further questions, please contact us:
contact@vendomnia.rs