VENDOMNIA RDRGRT01 Original Bedienungsanleitung Seite 11

Description of key functions of electronic display
1. ON/OFF (on-off button): Hold this button on a power-off state to turn on the display;
press this button for 3 seconds on a power-on state to shut down the operation.
2. MODE (MODE button): In a state where the display is not on yet, press the MODE button
to enter the settings state and continue to press this button to switch between the
preset modes.
3. UP ( ): Increase the setting value for the features you set.
4. DOWN (
5. RESET (Reset button): In the setting state, press this key to clear the current setting
value.
6. KM/ML (switch button for Kilometers/Miles): Long-press this button to switch
between kilometers or miles showing on the display.
7. SPEED (speed): Press this button to immediately switch the mean area of the display
to show speed.
8. /500M (500M time): Press this key to immediately switch the mean area to a display of
500 meters.
9. CAL/H(Calories per hour): Press this button if you want to immediately switch the
mean area of the display to show how many calories are burned per hour.
If you have any further questions, please contact us:
contact@vendomnia.rs
Description of LCD display
1. Function of time (TIME): the character zone of "TIME"
2. Function of distance (DIST): the character zone of
3. Function of paddle frequency (SPM): the character
4. Function of average (AVG): the character zone of
): Decrease the setting value for the features you set.
OPERATING MANUAL FOR DISPLAY
shows the running time, where the time setup range
is 00:00—99:00.
"DIST" shows the mileage of movement, where the
Distance in KM (km), the distance setup range is
0.000—9999 kilometers.
zone of "SPM" shows the frequency of paddling,
where the units are number s/min.
"AVG" shows the speed(KM/H), Calories per hour
(CAL/H), and 500 meters time (/500M), which switch
to display in the "AVG" area.
EN
11