Kick Back And Related Warnings - Vevor R7311 Originalanleitung

work piece fragments. The eye protection must be capable of stopping
flying debris generated by various operations. The dust mask or respirator
must be capable of filtrating particles generated by your operation.
Prolonged exposure to high intensity noise may cause hearing loss.
j) Keep bystanders a safe distance away from work area. Anyone entering
the work area must wear personal protective equipment. Fragments of the
work piece or of a broken accessory may fly away and cause injury beyond
the immediate area of operation.
k) Position the cord clear of the spinning accessory. If you lose control, the
cord may be cut or snagged and your hand or arm may be pulled into the
spinning accessory.
l ) Never lay the power tool down until the accessory has come to a
complete stop. The spinning accessory may grab the surface and pull the
power tool out of your control.
m) Do not run the power tool while carrying it at your side. Accidental
contact with the spinning accessory could snag your clothing, pulling the
accessory into your body.
n) Regularly clean the power tool's air vents. The motor's fan will draw the
dust inside the housing and excessive accumulation of powdered metal
may cause electrical hazards.
o) Do not operate the power tool near flammable materials. Sparks could
ignite these materials.
p) Do not use accessories that require liquid coolants. Using water or other
liquid coolants may result in electrocution or shock.

2. KICK BACK AND RELATED WARNINGS

Kickback is a sudden reaction to a pinched or snagged rotating wheel,
backing pad, brush or any other accessory.Pinching or snagging causes
rapid stalling of the rotating accessory which in turn causes the
uncontrolled power tool to be forced in the direction opposite of the
accessory's rotation at the point of the binding.
For example, if an abrasive wheel is snagged or pinched by the workpiece,
the edge of the wheel that is entering into the pinch point can dig into the
surface of the material causing the wheel to climb out or kick out. The
wheel may either jump toward or away from the operator, depending on the
- 7 -