Cleaning & Storage - Vevor R7311 Originalanleitung

SANDING METAL
WARNING: Some additional precautions have to be taken when sanding
metal.
● ALWAYS connect the sander via a suitable RCD.
● IALWAYS connect the sander to a suitable workshop dust extraction
system.
● Clean the tool thoroughly before using it to sand metal.
WARNING: Hot metal particles and sparks could ignite residual wood dust.
● Always clean the tool THOROUGHLY when switching from sanding wood
to sanding metal, and vice versa.
● A sanding disc that was previously used for sanding metal should not be
used on wood again. Residual metal particles may lead to scratches, and
damage the work-piece surface.
CLEANING & STORAGE
1. Please unplug the power cord and make sure the product is stopped
before cleaning.
2. Wipe with a dry towel, do not soak in liquid.
3. Always keep tool and cord clean(especially ventilation slots).
4. Do not attempt to clean ventilation slots by inserting pointed objects
through openings.
TIPS: Compressed air can be used to clean the powder on the surface of
the product.
5. Always unplug the machine before storage.
6. Always ensure the machine is cleaned, cooled, and dried before the
string.
7. Cleaning and user maintenance shall not be carried out by children
without supervision.
- 17 -