lit green
The battery is fully charged
blinking yellow
The rechargeable battery is almost empty (and the appliance moves to the pool wall - self-parking
mode).
lit or blinking red
The device indicates a defect.
Functions of the app control via Bluetooth (optional)
"Robo Control" is a free app for your smartphone or tablet. This app allows you to set up the cleaning
program on designated pool cleaners via Bluetooth and use the full range of functions of the device.
The cleaning programme 'Standard full pool - wall + floor + waterline' is preset on delivery.
(1) Bottom cleaning / *Eco bottom cleaning
The device only cleans the bottom of the pool. / *Additional setting only possible in the APP. Energy-
saving mode to enable longer running time.
(2) Wall cleaning
The device only cleans the pool wall.
(3) Standard full pool / *Wall then floor
Wall + floor + waterline / *Additional setting only possible in the APP. The cleaning sequence can be
defined here with the APP.
Preparation
Charging the rechargeable battery
Charging at a temperature below 10 °C leads to chemical damage to the cell and can cause a
fire.
- Charge the rechargeable battery at room temperature.
Charging the rechargeable battery in a wet or moist charging socket leads to corrosion of the
contacts.
- Only connect the charger to the device if the charging socket is dry.
Charging process
1. Switch off the device before charging.
2. Unscrew the cap
the charging socket.
3. Connect the charger to the device.
4. Plug the charger into a socket.
The status indicator
green. The rechargeable battery is charging.
5. When the charge control indicator is lit green,
disconnect the charger from the power supply
and the device.
6. Screw the cap
5
socket.
The rechargeable battery is charged.
counterclockwise from
5
on the device flashes
6
clockwise onto the charging
WARNING!
Risk of fire!
NOTICE!
1
25