Functions Of The App Control Via Bluetooth (Optional) - Steinbach APPcontrol Originalbetriebsanleitung

The TIME button
10
the lit LED indicates the currently selected mode.
13
- 1H stops the cleaning process after one hour.
- 2H stops the cleaning process after two hours.
- 3H stops the cleaning process after three hours.
Autostart function
Use this function to set the automatic start of operation.
The function can only be set via the app. The lit LED
function. The LED indicator blinks to indicate a cleaning program that was started by the
autostart function.
ON/OFF function
Use this function to switch the control unit on or off and to start operation.
Use the ON/OFF button
- ON (switches the control unit on).
- START (starts the cleaning program set with the Mode and Time functions);
- and OFF (stops all active cleaning programs and switches the control unit off).

Functions of the app control via Bluetooth (optional)

Start menu
Connection status
Indicates the connection status.
- connected indicates that the app is
connected to the control unit.
- not connected indicates that the app is
not connected to the control unit.
Device detection
2
Connecting an available and compatible
Bluetooth device.
Language
3
Selection of the display language.
Automatic mode
4
Set the type of cleaning and start the
cleaning program.
Manual mode
5
Manual device control.
40
alternates between the running times. Before the start of operation,
11
12
to switch between the following functions:
12
1
indicates activated autostart
11
C
2
4
5
6
1
3