VEVOR RD-10 Bedienungsanleitung Seite 7

Functions and Applications
This section describes the functions, applications, service environment and
other aspects of the Cutting Edge Saw. The Cutting Edge Saw is a power
tool developed for fast and efficient cutting of various ferrous and
nonferrous materials. This multipurpose tool can be used by a variety of
contractors however the primary design was for flush cutting or free cutting
reinforcing bars, coil rod and all-threaded rod used in the construction
industry.
Application of the Tool Actual areas of application the Cutting Edge Saw is
used for are as follows:
CE-25
3/8" to 1" or 10mm to 25mm grade 60 rebar (reinforcing bars), up to ½" I.D.
pipe, 1" O.D. copper water pipe, 1" O.D. tubing, 1" conduit, 1" square steel
tubing and bar, and up to 1" O.D. all-threaded or coil rod.
Rules of Use and Storage To use the tool to its fullest performance, the
user is required to be fully familiar with the saw itself, the cutting blades,
and storage procedures upon completion of work.
Specifications
The power tool is a multipurpose saw with an enclosed guard and flush
cutting capabilities. The specifications of the main unit are as follows.
Standard Blade: (Best for Ferrous Metals)
The CE-25 is supplied with (2) each 5" (127mm) blade diameter × 1.6mm
thickness, 24 teeth with laser welded flange for mounting to Cutting Edge
Saw spindle. The maximum blade RPM is 2,000.
Operation
Checking and Preparation of Working Environment: Check the following
before using the Cutting Edge Saw. Always observe the instructions and
prohibited items.
Checking of weather conditions, do not use in the rain or snow:
- 6 -