Parameter List; Safety Instructions - Vevor Rd-10 Bedienungsanleitung

PARAMETER LIST

Model NRB-22
Wattage(W) 1100
G.W.(kg) 5,75
N.W.(kg) 6.4
Cutting speed ≤16s
Max Rebar 40mm
Min Rebar 4mm
Note: There are two versions of the voltage of the above product model,
respectively, AC220-240V 50Hz and 120V 60Hz, please see the nameplate
information of the product.

SAFETY INSTRUCTIONS

Purpose of this manual This manual is intended to provide users with
correct knowledge and the procedures for operation, maintenance and
inspection of the tool, a multipurpose flush cutting saw for cutting
reinforcing bar, coil rod, all-threaded rod, pipe, tubing, and conduit.
Improper use of the tool may possibly lead to a serious accident. Therefore,
always read this instruction manual before using the tool to familiarize
yourself with its correct usage, operating method, warnings, etc.
Safety Instruction & General Safety Rules
Warning! Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
personal injury.
Work Area Safety
•Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- 2 -