VEVOR RD-10 Bedienungsanleitung Seite 6

•Disconnect the plug from the power source and/ or the battery pack from
the power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
•Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate the
power tool.
•Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
•Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
•Use the power tool, accessories and tool bits etc., in accordance with
these instructions, taking into account the working conditions and the work
to be performed. Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
Have your power tool serviced only by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
Contents of the Cutting Edge Saw Package
Upon purchasing the Cutting Edge Saw, open the carrying case and check
the contents for the following:
CE-25 Package
1.CE-25 Corded Cutting Edge Saw with blade mounted : 1unit
2.Removable Side Handle and chip collector attachment: 1 unit
3.Allen Wrenches for Blade Removal and Installation: 1 unit
4.Additional Saw Blade: 1 unit
5.Operation Manual: 1 copy
- 5 -