Inserting And Removing The Battery; Charging The Battery - Hanseatic Hvs450Bmc Gebrauchsanleitung

2. Mark out the drill holes.
The drill holes must be at a
height of at least 145 cm above
the ground and the distance be-
tween the holes must be 4.7 cm.
3. Drill holes at the marked points,
using a diameter that can ac-
commodate the wall plugs.
4. Place the wall plugs into the
holes.
5. Attach the wall bracket (16) to
the wall using the two screws.
Inserting and
removing the battery
(4)
• To insert the battery (4), slide
it into the receptacle under the
handle (3).
• To remove the battery, press
the lock button on the battery
and remove the battery from
the receptacle.
First use Page EN-17

Charging the battery

Before first use, we recommend
charging the battery (4).
The charge level indicator
(18)flashes during the charging
process. The charge level indi-
cator shows the charging status.
When the battery is fully charged,
the charge level indicator stops
flashing.
1. Connect the mains power
adapter (15) to the connector
on the handle (3).
2. Insert the mains power adapt-
er into the socket.