First Use; Unpacking The Appliance; Mounting The Wall Bracket - Hanseatic Hvs450Bmc Gebrauchsanleitung

Page EN-16

First use

First use
Unpacking the
appliance
NOTICE
Risk of damage to property!
Improper handling of the ap-
pliance may result in dam-
age.
■ Do not use sharp objects
to unpack the appliance.
1. Unpack the appliance.
2. Carefully remove all parts of the
packaging, plastic profiles, tape
and foam padding.
Mounting the wall
bracket
WARNING
Risk of injury!
Improper installation of the
appliance can lead to injury.
■ Before drilling the holes,
ensure that no wires or
cables (power, gas, wa-
ter etc.) will be damaged
(check with a line locator).
NOTICE
Risk of damage to property!
Improper handling of the ap-
pliance may result in dam-
age.
■ Check the condition of the
wall before mounting the
wall bracket.
You should mount the wall bracket
before setting up the appliance.
You will need:
– 2 screws
– 2 dowels
Tools and aids
You will need:
– Screwdriver
– Drill with drill bit suited to the
nature of the wall
– Measuring tape / ruler
– Level
– Pencil
The drill holes must be at
least 145 cm from the
ground.
1. Use a pencil to draw a horizon-
tal construction line on the wall
first.
It is best to use a spirit level for
this.