hanseatic HVSWD300DBKC Gebrauchsanleitung Seite 63

(18)
(10)
2. Insert battery pack (18): Slide
the battery pack into the bat-
tery compartment (37).
3. Insert battery compartment
cover: First, place the battery
compartment cover onto the
battery compartment with the
bottom end. Then press on the
top end until the battery com-
partment cover audibly clicks
into place.
Removing the battery
pack
1. Press the release button (35)
and remove the battery com-
partment cover (10).
2. Pull the battery pack (18) out
of the battery compartment
(37).
Charging the battery pack
(37)
There is no need to remove the
battery pack in order to charge it.
Only remove it if you wish to re-
place it with a new battery pack
before you clean the appliance or
if you are storing it for an extend-
ed period.
1. Connect the mains cable (19)
to the charging station (14).
2. Insert the mains adapter
(19) into a properly installed,
earthed electrical socket.
Start-up Page EN-17
Fully charge the battery
pack before using the appli-
ance for the first time.
If the charge status is low,
the 'Error' symbol
flashes on the display (5).
(26)