Indicators On The Curing Light Handpiece; Before The Cure; During The Cure; Operating The Buttons And Modes - Loop Clk01 Gebrauchsanweisung

1.4 INDICATORS ON THE CURING LIGHT HANDPIECE

A high-resolution OLED (Organic Light-Emitting Diode) color display screen will indicate the following:
1.4.1 Before the cure (powered up, but not curing):
Shipping lock screen
Power-up screen

1.4.2 During the cure:

• Power bars show relative power output
• Cure time in seconds
• Progress bar shows passage of actual cure time
1.4.3 Immediately following the cure:
Successful cure and total joules delivered

1.5 OPERATING THE BUTTONS AND MODES

Turn on/Wake up: Press any button to turn on the handpiece.
Menu: Press to select light irradiance or menu options.
Press & hold to cycle closed-loop ON/OFF.
Select: Press to select cure time or setting options.
Press & hold to access preset settings.
Start/stop:
Turn off: +
Enter/Exit Settings:

1.5.2 Modes with Closed-Loop Operation

Direct Restorative Mode
(closed-loop ON)
Press to start or stop a cure.
Press & hold to activate Tack mode
Press and hold simultaneously for 3 seconds (or until
screen goes black) to force a shutdown and turn off.
+ Press and release both buttons
simultaneously to enter or exit Settings.
Idle screen (closed-loop OFF)
Idle screen (closed-loop ON)
5