Product Overview; Product Description; Components; Indicators On The Charging Base - Loop Clk01 Gebrauchsanweisung

Prior to installation and start-up of the unit, please read these instructions carefully. The proper function and safe
operation of this unit depend on the user's compliance with the standard safety procedures as well as the specific
safety recommendations presented in these operating instructions. Do not discard these instructions for the duration
of product use.
IMPORTANT: The unit must be fully charged for 3 hours prior to the first use. Refer to Section 4.10 "Charging
and Batteries".

1. Product Overview

1.1 PRODUCT DESCRIPTION

1.2 COMPONENTS

System components:
• 1 Loop LED curing light handpiece
™
• 1 Loop calibration and charging base
™
• 1 Loop universal power supply and adapters
™
• 1 Loop protective barrier sleeves pack
™
• 1 Loop protective light shield
™
• 1 Loop lens cleaning cloth
™
• 1 Quick start guide

1.3 INDICATORS ON THE CHARGING BASE

Loop is a LED (Light Emitting Diode) light source for polymerization of dental materials
™
for use by trained dental professionals. It is suitable for use with a broad range of light-
cured dental materials including materials for restoratives such as light-cured and dual-
cure cements, composites, bonding agents/adhesives, bases, liners, fissure sealants,
temporaries, as well as luting materials for brackets and indirect restorations such as
ceramic inlays. Loop
integrated calibration station. The device is a medical electrical device in accordance
with IEC 60601-1-2.
Loop features a patented coaxial feedback sensing system that measures the actual
™
irradiance, which is the light power striking the targeted tooth. The feedback data
allows Loop to make corrective adjustments to the LED power output hundreds of
™
times per second. This continually corrected "closed loop" operation ensures that the
targeted surface of the restorative dental material receives the intended irradiance
independent of operator-induced distance variations.
(not shown)
A green light indicates that the charging base is receiving power.
consists of a wireless handpiece and a charging base with an
™
4