LOOP CLK01 Gebrauchsanweisung Seite 3

4. Operation
4.1 Operating states
4.1.1 Idle
4.1.2 Curing with closed-loop OFF
4.1.3 Curing with closed-loop ON
4.1.4 Sleep
4.2 Normal operation
4.2.1 Direct restorative mode
4.2.2 Tack mode
4.3 Settings
4.4 Calibration
4.5 Self-check dirty lens detection
4.6 Positioning the rotating tip
4.7 Protective barrier sleeve
4.8 Protective light shield
4.9 Power supply and adapters
4.10 Charging and batteries
4.11 Use with a radiometer
5. Maintenance and Cleaning
5.1 Cleaning during use
5.2 Cleaning after use
5.3 Cleaning the lens
5.4 Cleaning the charging base
5.5 Cleaning the self-check and calibration surfaces
6. Troubleshooting and Service
7. Warranty
8. Specifications
8.1 Curing light handpiece specifications
8.2 Charging base specifications
9. Electromagnetic Compatibility
10. Accessories and Replacement Parts
11. Contact Information
3