Warranty; Specifications; Curing Light Handpiece Specifications - Loop Clk01 Gebrauchsanweisung

7. Warranty

LIMITED WARRANTY
Garrison Dental Solutions guarantees that the purchased Loop
®
manufacturing defects for three (3) years from the date of purchase. This warranty shall not cover damage or defect
caused by misuse, accident, ordinary wear incident to normal use, improper handling or actions contrary to those
indicated in this manual, regardless of the date of purchase. This warranty applies solely to the Loop
light handpiece and the Loop
such as the battery, power supply, adapters, light shield, barrier sleeves and lens cleaning cloth. Garrison
Solutions reserves the right to repair or replace the product at its discretion. This warranty applies solely to the
original purchaser and is not transferable.
Three (3) year limited warranty:
• Loop LED curing light handpiece
™
• Loop calibration and charging base
™

8. Specifications

8.1 CURING LIGHT HANDPIECE SPECIFICATIONS

Dimensions Length = 209.6 mm
Width = 35.5 mm
Weight = 130 g
Wavelength Effective Output Power: 390 – 480nm
Range/Light
Spectrum
Loop Spectrum Distribution in Operating Modes
™
Light Output Closed-Loop ON: 5 20 Joules ± 15%
Closed-Loop OFF: 3 20 Joules ± 15%
Maximum At tooth surface:
Irradiance 3,000 mW/cm
At lens surface:
4,000 mW/cm
Area of Effective At 0 mm from lens:
Output Power 74 mm
At 6 mm from lens:
117 mm
calibration and charging base, and does not cover any accessory components
™
± 15%
² 1,2,3
² 1,2,5
area, 9.7 mm diameter
2
area, 12.2 mm diameter
2
equipment listed below will be free from
™
See Section 4.11 for radiometer
1,2,4 1
measurement instructions
Measured with a MARC LC
2
1,2,3
radiometer
Relative to lens surface
3
Relative to the target surface
4
In closed-loop modes the
5
irradiance at the lens is higher
when the target is further away
24
LED curing
™
Dental
®
Power 3000
Power 2000
Power 1000