Renkforce RF-HC-800 Bedienungsanleitung Seite 61

13.5.4 Camera settings page (B7)
Tap the button (B7) at the bottom left of the screen to open the camera settings page.
Settings on this page are the same as those in the camera menu.
D1
Tap this button to return to the app's main page.
D2 This section contains information about the cam-
era (similar to B3, but with more details such as
temperature and battery status). Here you can
also rename the device.
D3
This menu item allows you to set the date and
time format and synchronise the date and time
with your smartphone.
D4 This section contains all the information about
the memory card, such as the available and total
storage space.
Here you can also enable loop recording, i.e.
whether the memory card should be automati-
cally overwritten when it is full.
D5 This menu item allows you to select any mode
you wish and set the PIR interval (see Chap-
ter 11.3.1).
D6
This option allows you to choose whether the
camera should take photos or videos or photos
and videos (see Chapter 11.3.3).
If you select "Photo", you can modify settings for
the photo quality (see Chapter 11.3.4) and burst
photo (see Chapter 11.3.6).
If you select "Video", you can modify settings for
the video resolution (see Chapter 11.3.5) and
video length (see Chapter 11.3.7).
If you select "Photo and Video", the display will
show all setting options.
D7 This function allows you to set a working time for
the camera (see Chapter 11.3.2).
D8 This menu item is used to modify the PIR sensor
sensitivity (see Chapter 11.3.8) and activate the motion filter (see Chapter 11.3.9).
D9
This option allows you to set the microphone volume, activate the watermark and switch the Wi-Fi status LED
on or off (see Chapter 11.3.11).
D10 This menu item allows you to select the language of the camera menu.
D11 This menu item is used to activate password protection for the camera and set the password (see Chap-
ter 11.3.14). Here you can also enable password protection for the app and set the password.
D12 Use this function to reset the camera to factory defaults (see Chapter 11.3.15). All you need to do is tap the
menu item and confirm the reset.
D1
D2
D5
D6
D7
D8
D9
D10
D11
D12
D3 D4
135_EN
61