Renkforce RF-HC-800 Bedienungsanleitung Seite 57

Once the camera has been found, it appears at the bottom of
the display.
Tap the green button to connect the camera. If the camera you
wish to connect is currently in standby mode, it gets activated
automatically during connection.
Important!
If you have any problems during the connection, you can con-
nect the camera manually.
In this case, tick the box and follow the instructions in the app.
If a pop-up appears on your screen asking if you want to connect
to the Wi-Fi because there is no Internet connection, confirm it!
The camera will now be connected. This can take several minutes.
When setup is complete, the display should look like the right-
hand screenshot. If anything went wrong, repeat the process.
Name the camera as you wish or tap one of the suggestions
below.
Tap the green button at the bottom to save changes and finish
the setup.
The newly added device (see the first screenshot in the next
chapter) now appears on the app's main page.
57