Renkforce RF-HC-800 Bedienungsanleitung Seite 56

13.4 Connecting the wildlife camera
To begin, switch on the camera. Connect the camera using the settings mode (with the slide switch set to "TEST")
or Live mode (with the slide switch set to "ON").
Important!
You must enable Wi-Fi and Bluetooth
For information:
During connection, the app connects to the camera via Bluetooth. The connection activates the Wi-Fi hotspot on
the camera to which your smartphone is connected.
You can add a new device manually by tapping the "+" button at the top right of the app's main page (A2). A new
device can also be added by tapping the green "+" button (A1) in the centre.
In the window that opens, tap "Wi-Fi Camera".
Tapping this section takes you to the next page.
Æ
This page shows a picture of the camera. Tap "NEXT".
The app will now search for the camera.
Æ
56
on your smartphone!
®