Attaching/Removing The Accessory Tool - Parkside Performance Pabsp 20 Li C4 Bedienungsanleitung Und Originalbetriebsanleitung

Removing the battery pack: Press
o
the battery pack release button
Remove the battery pack
Attaching the battery pack: Align the
o
battery pack
[ ]
it into it. Ensure it clicks noticeably in
place.
The battery pack can only be inserted
into the product in one direction.
˜ Checking the battery pack
charging level
(Fig. B)
Check battery pack charge level: Press
o
the button
[
LEDs light up:
[ ]
LED
[ ]
Red/orange/green
Red/orange
Red
˜ Charging the battery pack
(Fig. C)
NOTE
The battery pack
u
at any time without reducing its life.
Interrupting the charging process
u
does not damage the battery
pack .
[ ]
Charge the battery pack
o
operation when it is at medium or low
charging level.
The charging control LEDs (green
and red ) indicate the status of the
[ ]
charger and the battery pack
[ ]
LED
Red LED lights up
Green LED lights up
.
[ ]
(Fig. D).
[ ]
to the handle and slide
. The charging level
]
Charging level
Maximum
Medium
Low
may be charged
[ ]
before
[ ]
[
:
[ ]
Status
Battery pack
charges
Battery pack fully
charged
LED
Green and red LED
flashing
Red LED flashing
Green LED lights up
(without battery pack) Charger ready
1. Insert the battery pack
charger
[
2. Connect the power cord with power
plug of the charger
[ ]
socket.
3. When the battery pack
charged: Remove the battery pack
from the charger
the power plug
the socket.
˜ Attaching/removing the
accessory tool
CAUTION! Risk of injury!
m
Accessory tools can be sharp
and may become hot during use.
Always wear protective gloves
when handling accessory tools!
WARNING!
m
Always switch the product off,
remove the battery pack
let the product cool down before
making any adjustments!
CAUTION! Risk of injury!
m
Keep your hands away from the
u
]
accessory tool when the product is
in operation.
After the product has been switched
u
off, the accessory tool continues
moving for some time. Do not touch
the accessory tool and do not
attempt to brake it.
Status
Battery pack
defective
Battery pack too
cold or too warm
into the
[ ]
.
]
to the
[ ]
is fully
[ ]
. Then disconnect
[ ]
of the charger from
[ ]
[
and
]
GB 17