Transport; Cleaning, Maintenance And Storage; Cleaning; Maintenance And Repair - Parkside Performance Pbsap 20-Li A1 Originalbetriebsanleitung

Requirements
To find the device in the PARKSIDE
app, the following requirements must
be met:
• The PARKSIDE app is installed on
your smartphone and Bluetooth®
is activated.
• The device contains the following
battery: PARKSIDE Performance
Smart battery Smart PAPS 204 A1/
Smart PAPS 208 A1/
Smart PAPS 2012 A1. This battery
is already connected to the
PARKSIDE app.
The device communicates with the
app via the battery.
Connecting the device to the
PARKSIDE app
1. Insert the smart battery (13).
2. Press the On/Off switch (17).
The "Connected" indicator (16)
flashes three times. When the
device is connected, the "Connec-
ted" indicator lights up continu-
ously.
3. Open the PARKSIDE app.
4. Your tool s.
The device is displayed in the list.
If the device does not appear in
the list, add the device manually.
Monitoring and controlling the
device
1. Your tool s.
2. Select the device from the list.
The device overview page is dis-
played.
3. Select the desired setting on the
overview page.
Select Help if you are unsure.
A dialogue box with a descrip-
tion for the relevant setting is dis-
played.

Transport

Notes
• Turn off the device.
• Make sure that all moving parts
have come to a complete stop.
• Remove the rechargeable battery.
• Remove the attachment tool.
• Always carry the device by the
handle (7).

Cleaning,

maintenance and
storage
WARNING! Risk of injury due to
unintentional start-up. Protect your-
self when performing maintenance or
cleaning work. Switch off the device
and remove the battery (13).
You should have any repair and main-
tenance work that is not described in
these instructions carried out by our
Service Centre. Only use original re-
placement parts.
Cleaning
WARNING! Electric shock! Never
spray down the device with water.
NOTICE! Risk of damage. Chemical
substances may attack the plastic
parts of the machine. Do not use any
cleaning agents or solvents.
• Keep the ventilation slits, motor
housing and handles of the ma-
chine clean. Use a damp cloth or
brush to do this.

Maintenance and repair

• Check the device before each use
for obvious defects such as loose,
worn or damaged parts.
• Replace the attachment tool if it is
blunt or otherwise damaged.
GB MT
33