Option - External Information Output Option; Option - Operation Counter - Hamma Misceo 3 Anleitung

Option - External information output option

Article No.:
2001210
Connection devices are available as accessories.
The external information output provides a voltage of 24 V DC (max. 0.5 A) for the Misceo 3's needs.
Pin assignment of the 4-pin plug:
pole = plug contact, position 2
+
-
pole = plug contact, position 3
If you did not order an external information output with your Misceo 3, you can have this retrofitted later. For
this, you will require retrofitting of an external information output (Art. No.: 2001213) and external
information output (Art. No.: 2001210). To retrofit, you must send in your device.

Option - Operation Counter

Article No.:
2001220
The operation counter warns before the container is empty and provides information concerning the used
water and concentrate data as cycle and total counter.
Maintenance function for concentrate:
In line 1, by specifying a volume, a reserve signal can be defined. As soon as the value displayed in line 3
exceeds the value in line 1, the warning message appears at the top right in the mixing menu,
Mixing operation and on the "Filling level reached" screen ("Filling level reached" only for automatic system
and intelligent pressure control).
Cycle counter:
Used quantities of a specific period can be read in lines 2+3. It is possible to reset the volume in lines 2+3 by
selecting with the cursor and the + or - keys.
Total counter:
It is possible to read the used quantities and the operating time of the entire period of use in lines 4+5+6.
These counters cannot be reset.
Return to the main menu with the enter key.
If you did not order an operation counter with your Misceo 3, you can have this retrofit later.
To do this, you will require the software update (Art. No.: 2002011) and the operation counter (Art. No.:
2001220). To retrofit, you must send in your device.
ENG 18
Designation
External information output for Misceo 3, for using
external signal lamps, signal horns or for integration in machine controls.
Including connection plug
Designation
Operation counter for Misceo 3 for measuring flow rates
- Cycle counter for water, concentrate and time
- Total operation counter for water, concentrate and time
- Including maintenance function for concentrate according to set volume