Scope Of Delivery Of Options; Safety Information - Hamma Misceo 3 Anleitung

Scope of delivery of the options
If you also ordered options for your Misceo 3, please check
whether all options are present in full.
Art. No. Quantity in pcs Designation
2001110 1
2001160 1
2001130 1
2001150 1
2001210 1
2001220 1

Safety information

This device was developed and manufactured in agreement with international safety standards.
As with all electric devices, however, you must exercise due caution, to guarantee optimum function and
safety. Please read the following notes and the operating instructions through carefully for your own safety.
In order to operate the Misceo 3 according to the ordinance for drinking water protection (DIN EN 1717), an
additional fuse is necessary, e.g. via an accepted system circuit breaker.
outlet from pressure shocks and pressure peaks. Pressure shocks and pressure peaks could damage the
Misceo 3. Talk to your installer.
If you place the mixing device in direct sunlight or near a radiator, it could be damaged under certain
circumstances. Avoid places where there are extremely high/low temperatures or high humidity. At the
selected site, the temperature should not fall below 15°C or rise above 35°C.
The mixing device may only be operated with the plug-in power supply provided for it.
Check whether the electric connection values of the mains socket agree with the technical data of the used
device.
When the mixing process is finished, the outlet hose is to always be held above the concentrate supply.
Check the Misceo 3 and its accessories before use. A damaged Misceo 3 must not be put into operation.
The water and power supply of the mixing device must always be disconnected after the end of
use or if the device is not being supervised!
ENG 4
Overflow monitoring for Misceo 3 (connection cable 3 m)
-> 1x connection 3-pin, to the right on the device
-> 1x float switch with holder
-> 1x jumper, stop incl. chain (Art. No.: 2001126)
Key switch incl. 2 keys and key chain
->1x lock to the left on the device
->2x keys with key chain (spare key Art. No.: 2001169)
Automatic system for Misceo 3 for automatic filling
-> 3x connections to the right on the device: minimum, maximum and stop
-> 1x connection plug, 3-pin, stop (Art. No.: 72001304)
-> 1x connection plug, 4-pin, minimum (Art. No.: 72001305)
-> 1x connection plug, 5-pin, maximum (Art. No.: 72001306)
-> 1x jumper, 3-pin, stop, incl. chain (Art. No.: 2001126)
-> 1x jumper, 4-pin, minimum, incl. chain (Art. No.: 2001132)
-> 1x jumper, 5-pin, maximum, incl. chain (Art. No.: 2001133)
Intelligent pressure control for Misceo 3 for fixed piping
-> The pressure sensor system is installed in the device,
recognizable on the sticker to the left on the device
External information output for Misceo 3
-> 1x connection 4-pin, to the left on the device
-> 1x connection plug, 4-pin, (Art. No.: 72001305)
Operation counter for Misceo 3 for detecting the flow rates
-> The operation counter is located in the main menu of the Misceo 3
Protect your water inlet and mixture