Option - Key Switch Option - Hamma Misceo 3 Anleitung

Option - Key switch option

Article No.:
2001160
The Misceo 3 key switch will allow you to protect your Misceo 3 from unauthorized use.
There are 2 keys included in delivery.
The Misceo 3 is fundamentally locked with the key switch. It cannot be put into operation with a key.
The key will be required for every input in the Misceo 3. If a mixing operation is started and the key is pulled
out afterwards, the mixing operation will continue to run. The mixing operation can now only be interrupted
with any key (emergency function), but can no longer be adjusted or restarted. A key symbol appears on the
display.
If you did not order a key switch with your Misceo 3, you can have this retrofit later.
For this, you will require retrofitting (Art. No.: 2001161) and the key switch (Art. No.: 2001160). To retrofit,
you must send in your device.
Special programming
If you do not want to block the complete operation of the Misceo 3 with the key switch, but only certain
adjustable values, and if mixing without the key switch should remain possible, special programming is
available on request. We would be happy to make you an offer.
2X
ENG 14
Designation
Key switch, including 2 keys and key ring
The key switch gives you the option
to protect your Misceo from unauthorized use.
A spare key is separately available, article no.: 2001169