Filling - Hamma Misceo 3 Anleitung

Filling

Filling makes it so that the Misceo 3 is supplied with water and concentrate already before and during
beginning with the mixing operation and guarantees you a high-quality mixing result from the first liter.
Before a started mixing filling runs automatically as needed, then mixing process starts. Manual intervention
of filling may be necessary if the filling time is too high or concentrate or water is not available.
ATTENTION: During filling, make sure that the mixture outlet side has free flow.
Please hold the outlet of Misceo 3 fixed while filling, it could have pressure shocks during the filling (caused
by water pressure). It is possible that it will splash. Please use suitable safety equipment (for example safety
glasses).
The manual filling:
If the concentrate or water runs out during the mixing process or can't be provided during automatic filling,
so you will be directed in the manual filling. There is a filling menu for concentrate and for water.
Fill concentrate
MISCEO FILL
CONCENTRATE
FILL =
[###
With pressing the Enter key you can start a new filling process in filling menu. While the diamonds (#)
appear, the Misceo tries to fill. If the filling process is successful and the concentrate or water is provided the
red LED goes out and the green LED lit on. Filling is completed and you will be forwarded in the menu.
To allow for smooth processing check that the concentrate hose of Misceo 3 is mounted correctly and the foot
valve immerse in concentrate completely so that the Misceo 3 can suck enough concentrate. Also the water
inlet hose should be mounted tightly and securely and the water supply shall be opened.
ENG 10
Fill water
MISCEO
WATER
[ ] FILL
] [###
FILL
= [ ]
]