Mixing; Infinity Function - Hamma Misceo 3 Anleitung

Mixing

Mixing with the Misceo 3 is quick and easy. As soon as you have set the data in the main menu,
you can enter your mixing data in the mixing menu.
Mixing menu
MIXING MENU
MIXTURE 5.6%
VOLUME 20L
START
MAIN MENU
To start the mixing operation, enter the desired concentration as well as the volume via the arrow keys and
the plus and minus keys. Pressing the "Enter" key along with the plus or minus key speeds up the adjustment
speed of the menu input. Once you have selected your data, place the cursor at "Start" and press "Enter" to
start the mixing operation. Are concentrate and water filled start the mixing process, otherwise filled the
Misceo 3 in advance.
ATTENTION: KEEP THE DISCHARGE IN THE CONTAINER
Mixing process
MIXING PROCESS
MIXTURE 5.0%
1000L/H
VOLUME
SET 5L
ACTUAL 3L
ACTUAL 0M
During the mixing operation, you can read off your mixing data as well as the current progress of the mixing
cycle. As soon as the desired volume has been reached, the Misceo 3 will finish the mixing operation and you
will go to the menu Mixing operation completed. The mixing operation can be interrupted and continued with
any key.
Mixing finished
MIXING PROCESS
FINISHED
MIXING MENU
MAIN MENU
END
VOLUME
20/ 20L
After the completed or interrupted mixing operation, you can choose whether you would like to go to the
mixing menu, main menu or would like to end with pressure relief. If the mixing operation was interrupted, it
is possible to continue the mixing operation with "Next".

Infinity function

If you have installed the automatic system or the intelligent pressure control on your Misceo 3, it might make
sense to operate the Misceo 3 with the infinity function. The infinity function allows you to operate the Misceo
3 without volume limits.
In order to activate the infinity function, go to the mixing menu with the cursor on "Volume" and press the
minus key until 5 liters appears. As soon as you press the minus key again, the infinity symbol will be
displayed and you can start the mixing operation as usual with the cursor on "Start".
When the infinity function is activated, the concentrate and water detection remain active and the Misceo will
interrupt the mixing operation if either of them run low. All options continue to work as usual, such as the
overflow monitor, the key switch, the automatic system, etc.
Mixing menu
MIXING MENU
MIXTURE 5.6%
VOLUME L
START
MAIN MENU
11 ENG