Special Safety Instructions For Battery-Powered Devices - Parkside Performance Pphlga 20-Li A2 Originalbetriebsanleitung

Do not use in the pres-
•
ence of an explosive
atmosphere.
Heat can be passed to
•
flammable materials
that are hidden.
After using the device,
•
put it on the base and
allow it to cool down
before it is packed
away.
Do not leave the device
•
unattended as long as
it is in operation.
Never use the device as a
•
hair dryer.
Never direct the hot air
•
flow at people or animals.
Do not look directly into
•
the nozzle opening on the
blow-off pipe.
Do not touch the nozzle
•
when it is hot.
Maintain distance
•
between the nozzle outlet
and the surface or work-
piece you are working on.
The device could over-
heat.
Cleaning, maintenance
and storage
Allow the motor to cool
•
down before storing the
device for a longer peri-
od.
Replace worn or dam-
•
aged parts in the in-
terests of safety. Use only
original spare parts and
accessories. Using ex-
ternally produced parts
results in the immedi-
ate loss of any warranty
claim.
The device may only be
•
opened by an authorised
electrician. Always con-
tact our service centre for
repairs.
Switch the drive off, , re-
•
move the battery and al-
low the device to cool off
if you want to clean, ad-
just, store the device or
to exchange an access-
ory part.
Handle the device with
•
care and keep it clean.
Store the device out of
•
reach of children.
Special safety instructions
for battery-powered
devices
• Ensure that the device is
switched off before inserting the
battery. Inserting a battery into a
device that is switched on can lead
to accidents.
GB MT
25